PVC Figure Price: What It Costs

This is a working guide to PVC figure price for new collectors: what the terms mean in practice, where the money goes, and which details are worth paying attention to.

Polystone and Mixed Media

Polystone is a casting resin loaded with mineral filler, which makes it denser and colder than plain resin and holds fine surface detail. The ASH 1/4-scale polystone bust is cold-cast polystone, hand-painted, on a machined alloy base. The LIN YUANZHE 1/4-scale articulated bust is mixed media, combining resin with fabric trim and ABS armour panels for a different tactile character in each zone of the piece.

Which Completes a Set

Because both are 1/4 scale from one studio, they sit together without scale conflict. Collectors who want the quieter piece start with ASH 1/4-scale polystone bust; those who want the conversation piece start with LIN. Owning both is the intended path, not a duplication, because the two finishes are deliberately different.

Hand-Painted Finish

The ASH 1/4-scale polystone bust is hand-painted, which is why edge transitions are crisp and sheen is consistent across panels. Hand work is the reason no two pieces share exactly the same micro-variation, and why any touch-up always reads as a patch rather than as original paint, so prevention beats repair.

ASH vs LIN YUANZHE

The ASH 1/4-scale polystone bust is a static 1/4-scale polystone bust, hand-painted, alloy base, edition of 500, about 32 cm, $459. The LIN YUANZHE 1/4-scale articulated bust is a 1/4-scale mixed-media articulated bust with red LED eyes on Type-C, edition of 999, about 34 cm, $499. Same studio, different collector job, and both are built to share a shelf.

Material Care at a Glance

Material	Care need	What to avoid
Polystone	Support the base, soft brush dusting	Solvents, lifting by the head
Fabric trim	40–55% humidity	Direct sun, compression in transit
ABS armour	Neutral pose in storage	Daily cycling of joints

Read the specification before the photograph, buy the piece you would keep even if the price never moved, and plan the shelf at the same time as the purchase.

Frequently asked

Q1 What matters most when choosing PVC figure price?

Material, scale and edition size decide how a piece displays and how it holds value. Compare those three first, then look at finish and base.

Q2 How much should I expect to pay for PVC figure price?

Entry pieces sit in the low hundreds; hand-finished, numbered editions run higher. Price tracks material, edition size and finish far more than raw size.

Q3 Does PVC figure price hold its value?

Numbered editions from a closed run hold value best. Open editions stay flat because supply is never capped.

Q4 Is a bigger piece always better?

No. Scale should match the shelf and the approach. One well-chosen anchor piece reads better than three pieces competing for the same space.

Q5 How do I compare two pieces fairly?

Line up material, scale, height including base, edition size and finish in one table. Price differences usually trace back to one of those five.

Q6 Do I need a display case?

It is the cheapest way to keep a collection looking new. If a case is impractical, dust fortnightly with a soft dry brush and keep the shelf out of direct sun.